Where is gas used?

MAF is used in any work related to the flame treatment of metal:

  • Brazing of copper, aluminum;
  • Welding of parts with thickness up to 3mm;
  • Metal cutting;
  • Spraying, restoration of parts;
  • Heat;
  • Float;

MAF is an effective, safe, economical acetylene substitute in almost all processes where he applies. A mixture of MAF 4 times cheaper than acetylene, safe and stable during operation. Just as important factor is ease and mobility. MAF is much more efficient than propane. The burning temperature is 1.5 times higher. MAF occupies an intermediate position between propane and acetylene. If you do not have enough propane temperature for your work, and acetylene, you do not want to use from the point of view of security and complexity, the LFA, what you need for your work!

Acetylene is a flammable gas (hence its use in welding). Main inconvenience when working with acetylene is a significant instability increasing when gas is under pressure. Acetylene may explode if the pressure exceeds 200 kPa, and also when casting, compressing, heating or mixing with air. As a result, during production and when working with Acetylene requires special precautions. MAF compared to acetylene is a stable mixture. By properties comparable to propane, since it contains about 20% propane. With When working with the LFA, precautions are used that are the same as when working with propane.

You can find out if the MAF is suitable for you in your process. calling by number (812) 925-58-51

Применение

SOLDERING

Применение

WELDING

Применение

CUTTING

Применение

DUSTING

Применение

GLASS MANUFACTURE

Применение

HEAT